Author Archives: brucesac

4 Key Differences Between Commercial And Residential HVAC Systems

This entry was posted in Commercial, HVAC, Residential and tagged on by .

Commercial HVAC SystemMany HVAC contractors and air conditioning service provider in Chandler specialize in either residential or commercial systems. While these systems have many underlying similarities, the differences are significant enough that competence with one type of system does not guarantee to understand with the other.

This comparison of residential and commercial HVAC systems should help you to understand the importance of finding a contractor whose knowledge and experience matches your system and your needs.

4 Differences Between Commercial And Residential HVAC Systems

Learn 4 important differences between commercial and residential heating and cooling systems now.

1. Commercial Systems Are More Powerful

Commercial spaces are frequently much larger than residential spaces, and often serve a much greater number of people. Commercial HVAC units must be expertly sized to account for employees and customers during peak hours, and proper sizing requires a contractor with specialized technical skill and experience.

Residential units are generally smaller and very less in terms of heating and cooling capacity. However, correctly sizing residential systems also requires knowledge and experience. In fact, correct residential sizing may be even more important because a unit that is too small won’t effectively keep you comfortable as it will be trying to constantly run to keep up with the thermostat’s settings. Whereas a unit too large will cycle on and off too quickly (short cycle) and won’t properly remove uncomfortable humidity from the inside of your home. These issues can also cause additional wear on a system and shorten its life cycle.

2. Different Locations

The size of commercial heating and cooling systems is one of the reasons that these systems are almost always housed on the roofs of commercial buildings. While residential units typically sit next to or behind a home, this arrangement is impractical for commercial buildings. By placing their HVAC systems on the roof, businesses not only take advantage of unused space but also protect their systems from vandalism. Furthermore, a rooftop location makes it easy for HVAC technicians to conduct system maintenance without disrupting business operations.

3. Commercial Units Are Packaged, Residential Units Are Split

Residential HVAC systems usually consist of two units: an indoor evaporator and an outdoor compressor. In contrast, most commercial systems combine both heating and cooling into a single rooftop air conditioner. Although these packaged commercial units are easy to access, they are complex to repair and to maintain relative to residential units. Commercial systems are also more likely to use multiple thermostats to manage temperatures in different zones of a building.

4. Residential Systems Are Standalone, Commercial Systems Are Modular

The size of a commercial system is flexible—these units come in modules that can be added or taken away in order to increase or reduce cooling and heating capacity. These modular systems can be very convenient, allowing a business to accommodate changing heating and cooling needs as their operations expand or contract. However, the use of modules creates an architecture for commercial HVAC systems that is quite different from the structure of residential systems. Without experience installing and maintaining these larger, modular units, technicians are likely to run into serious difficulties.

Residential Unit-Professional HVAC Contractors

Quality HVAC Services In Chandler

Bruce’s Air Conditioning and Heating can provide professional residential and commercial air conditioning service like install, and repair both. We offer 100% guaranteed satisfaction, 24/7 emergency services, and NATE certified technicians. If you would like to learn more about our quality heating and cooling services, or set up an appointment with one of our experienced and licensed technicians, please give us a call today!

Learn More About Our Quality HVAC Services

How Ductless Mini-Split Heat Pumps Work

This entry was posted in HVAC and tagged on by .

Heat Pump-How Ductless Mini-Split Heat Pumps WorkIf you’re in the market for a new HVAC system, you have many more choices to consider than homeowners of the past. One option not available until fairly recently is the ductless mini-split heat pump, which differs from a traditional centralized air system in a number of key ways.

Here are some of the highlights to keep in mind when assessing this modern temperature control system’s usefulness for your home.

How Heat Pumps Differ From Furnaces

When you turn on a heat pump, the unit does not burn fuel like a traditional furnace, or activate a heating element like an electric furnace. Instead, it funnels existing heat from the local environment (most often from the outside air) and uses a blower to direct that heat into your household’s interior spaces in the winter. During warmer parts of the year, a heat pump’s blower can run in the opposite direction and serve as an air conditioning function by pulling warm air out of and cooling your home.

Ductless Heating And Cooling

If you’re like most Americans, your HVAC system relies on a network of indoor ducts to circulate, heat and cool the air in your home. These metal run through spaces above your ceilings, behind your walls and/or under your floor joists.

A ductless system does not rely on an indoor ducting network for heating, cooling or air circulation. Instead, this type of system features compact heating/cooling units installed in rooms throughout your household. Small tubes known as conduits run from each of these units through a floor or wall to your home’s exterior, then travel onward to the heat pump’s enclosure.

Mini-Split Zone Systems And The Benefits

IMini-Split Heat Pump Zone Systemsn a mini-split heating/cooling system, you’re not forced to circulate air to all of the rooms in your home simultaneously. Instead, you can create separate temperature zones by remotely adjusting the settings of the room-mounted units you have installed. In any given zone, you can set a temperature that differs from the temperature maintained in other zones. You can also shut down all heating and cooling functions in a zone, if you so desire. In addition to improving the comfort of your home, this flexibility can help you control the amount of money you spend on utilities each month.

A ductless mini-split heat pump combines the advantages of heat pumps, ductless heating/cooling systems and mini-split zone systems. In the U.S., residents of many regions live in climates that make this heating/cooling setup a potentially attractive option. Typically, the only weather-related factor that makes the setup impractical is exceedingly cold wintertime temperatures. If you live in a more temperate region, a ductless mini-split heat pump may prove just the right fit for your heating and cooling needs.

Chandler HVAC Experts

If you’re still wondering which heating and cooling system is right for you, give the Chandler HVAC industry experts at Bruce’s Air Conditioning & Heating a call. Our knowledgeable techs will listen to your needs and assess your home to find out which quality system will work best for you and your family. We also offer 100% satisfaction guaranteed.

Click here to learn more about our quality Trane heat pumps

Call Us Now To Set Up An Appointment For Repair, Replacement Or Installation!

Deciding On A Heat Pump? Here’s Everything You Need To Know

This entry was posted in Heating and tagged , on by .

Lady On Laptop-Benefits Of A Heat PumpIf you live in an area with relatively moderate winters, you have a number of practical options to consider for your home heating system. Top among these options is the heat pump, a device that draws heat from other sources instead of generating it internally like a furnace.

Discover everything you need to know when it comes to using a heat pump for your home heating including features and benefits.

Features And Benefits To Consider When Deciding On A Heat Pump

Here are some of the key points to consider when determining the suitability of a heat pump for your heating needs.

Furnaces vs. Heat Pumps

Furnaces are direct heat generation devices. When you turn them on, they burn a fuel source (most often natural gas or propane) or run electricity to an internal component called a heating element.

In contrast, heat pumps are heat transfer devices. When you turn them on, they pull heat from a nearby location and transfer that heat to your home’s interior with the help of a blower. Most heat pumps extract the heat they use from the outside air. This may sound counterintuitive, but it works quite well unless you live in a region with truly frigid winters. A heat pump may also extract heat from a geothermal source such as the ground or any nearby body of water.

Ducted vs. Ductless Heat Pumps

Ductless Split System Heat PumpIn most cases, heat pumps transfer heat to your household’s interior through a connected network of ducts, which run through unfinished indoor space to room openings called registers.

However, a specific type of heat pump, called a ductless mini-split heat pump, does not rely on a ducting network. Instead, houses with this type of device have small, individual heating units installed in various rooms. Tubes called conduits run from these units directly to the outside of the home before meeting up at the heat pump. As a rule, ductless units rely on outside air as their heat transfer source.

Features That Improve Heating Performance

Some heat pumps are designed with features that significantly improve their efficiency or other aspects of their overall performance. Examples of these desirable features include blowers that can run at two or more speeds, the ability to adjust the heat pump’s heating capacity as needed, and backup burners that can keep the incoming air at an acceptable temperature during cold snaps. A ductless mini-split heat pump also lets you improve efficiency and performance by setting up separately controlled temperature zones inside your home.

The Potential For Energy Savings

Heat Pump Energy SavingsSince heat pumps don’t generate their own heat, they can potentially save you a lot of money in energy costs. In fact, in a best case scenario, you can save up to 75 percent on your heating bills if you rely on a heat pump instead of a traditional furnace or electric furnace.

Heat pumps can also save you money because they typically operate more efficiently than furnaces. Compared to an electric furnace, use of a heat pump can shave a third or more from your monthly operating costs.

Still Unsure Of What Type Of Heating System You Should Get For Your Home?

If you’re still not sure which heater is best for you and your family, call the experts at Bruce’s Air Conditioning & Heating. Our experienced technicians can help you choose the best unit for your needs.

Call For A Free Estimate On A New Unit Today!

Does Your Home Have A Heat Loss Problem?

Does Your Home Have A Heat Loss ProblemDuring cold winter months, you are perfectly aware that heating costs make up the bulk of your electricity or gas bill.

Consequently you want your HVAC system to work as efficiently and as effortlessly as possible, so you can enjoy the warmth it produces without worrying yourself to death about how rapidly the dial on your energy meter is spinning.

Unfortunately, wintertime heat loss is a common source of waste in most homes. Even well-constructed buildings are far from airtight and it is amazing how much heat can escape into the open air if sources of leakage go unnoticed.

As winter has progressed have you noticed your energy costs rising? Do your bills seem out-of-proportion in comparison to friends and neighbors? Do you notice your furnace kicking on and off more frequently than in the past? Are there certain rooms in your home that seem noticeably colder than others?

All of these indicate you have a heat loss problem and that it is significant enough to be having a measurable impact.

Learn the sources of heat loss problems.

Identifying The Sources Of Heat Loss Trouble

HeatAir leaks in homes can happen just about anywhere. The best way to detect them is to contact your local energy company and ask them to send a consultant to your home to perform a heat loss audit (this service may be offered for free). If they can’t or won’t send someone you can always hire a private home energy auditor, who will most likely do it for a relatively small fee.

In the meantime, you can look around on your own to see what you can spot. Here are a few things to check for:

Doors And Windows

Cracks and spaces here are fairly easy to find. Just stand on the other side, feel around the perimeter of your doors and windows and see if streams of warm air are escaping (or cool air is coming in). It can usually be fairly easy to fix door and window gaps with caulk or weather stripping that you can buy and apply yourself.

Other locations where gaps may be causing air leakage include electrical outlets, plumbing cuts beneath sinks and dryer vents on outside walls. All can be plugged with caulk or foam sealers (just make sure to remove the foam sealer before using your dryer).

Filters And Vents

HVAC units won’t move air properly if filters are clogged or vents plugged or blocked. It’s fairly easy to check for this and to take action to combat it, either by cleaning where you can or buying a replacement air filter when it’s dirty.

Attic Heat Loss

This can be traced to inadequate insulation, unsealed wall partitions that channel heat from below or even poor attic ventilation.

Insulation

For the most part you won’t be able to tell if the insulation in your walls, floors and ceilings is adequate or has somehow been compromised. Bad insulation is a big source of leakage, however, and it is one problem a home heat loss audit can help you uncover.

Heat Loss Is Your Loss

Heat loss will make you colder, cost you money and put undue stress on your furnace to the point where its life span may be reduced.

If You’ve Noticed Heat Loss, Call The Heating Experts

Have you noticed heat loss in your home or problems with your heater? Contact the heating and cooling experts at Bruce’s Air Conditioning & Heating. Our licensed and professional technicians will thoroughly inspect your heater and home and provide a viable solution to your problem.

Trust the industry experts and call us today! And don’t forget to “Follow Us” for future Post and Information

5 Things HVAC Contractors Should Know About Wi-Fi Thermostats

This entry was posted in Commercial and tagged on by .

5 Things HVAC Contractors Should Know About Wi-Fi ThermostatsWi-Fi enabled thermostats are quickly replacing digital thermostats. It is predicted that by 2020, sales of these types of thermostats will surpass digital sales.

Many contractors are making these thermostats part of their package in order to get ahead of the competition.

Here’s what contractors should know in order to give their customers the best service and solutions.

Five Things HVAC Contractors Should Know About Wi-Fi Thermostats


1. Price And Profitability

Wi-Fi enabled thermostats vary in price depending upon the functions and features desired by the customer. When you work with your preferred wholesaler, you can find models that your customers can afford that will also be profitable for your company.

2. Installation

Many of these Internet enabled models come with apps that make the online setup easy. Your technicians should be able to learn the installation fairly painlessly without needing to understand confusing technology. Once your technicians install a couple of times, the installation process may become second nature.

3. Business Promotion

Many models of Wi-Fi enabled thermostats allow heating and cooling companies to program information onto the thermostat itself, such as a company’s name, business logo and contact information. When your customers look at their thermostats, your company will thus be forefront in their minds, which makes it easy for them to reach you when they need service.

4. No C-Wire Needed

Some HVAC contractors are under the impression that their customers need a c-wire in order to use an Internet enabled thermostat. This can seem like a hindrance, as over 60 percent of homes don’t have c-wires. However, there are a number of Wi-Fi enabled thermostats that don’t require a c-wire, so you should always be able to meet the needs of your customer.

5. Enhanced Convenience

Wi-Fi enabled thermostats are generally much easier to use than their digital counterparts. Home and business owners can program setbacks, adjust temperatures, control their thermostat away from the building or home via a smart device and much more. Over 70 percent of current homeowners with programmable thermostats don’t use their energy-saving features, which means the thermostats aren’t utilizing optimal performance. With a simple setup and easy adjustments, Wi-Fi enabled thermostats make it easier for the user to operate, and they also offer convenient, remote access.

Your company can get a leg up on the competition by providing Wi-Fi enabled thermostats for your customers. Both residential and commercial structures can benefit from this new technology.

Read More Of Our Commercial-Related Blogs Here